Service Hotline:0769-8869-7788  

Search
Confirm
Cancel
News Center
Check category

What are the maintenance and safety precautions of high gloss machine

  • Categories:Group News
  • Author:
  • Origin:
  • Time of issue:2022-04-20 09:27
  • Views:

What are the maintenance and safety precautions of high gloss machine

  • Categories:Group News
  • Author:
  • Origin:
  • Time of issue:2022-04-20 09:27
  • Views:
Information
1. After turning on the highlighter, check whether the guide rail oil behind the oiler is normal, press the manual oiling button, and whether the oil pressure pointer rotates. If not, you need to repair the oil pump. When the oil level is lower than the oil mark, the guide oil should be added according to the specified mark.
 
2. Regularly clean the filter screen of the ice water machine, take out the filter screen, and use an air gun to blow foreign objects out of the machine. Clean once a week and check that the water level scale is within the normal scale. If you need to be below the scale, you will need to add plain tap water to the normal scale.
 
3. The machine tool should be cleaned and maintained before each get off work, and the sundries, waste and waste should be cleaned up in time.
 
4. Employees wear long-sleeved clothes, no gloves, and no long hair (especially when the spindle rotates) when they go to work. Wear non-slip work clothes.
 
5. During high-gloss machining, it is strictly forbidden to reach into the working machine. After machining, when the spindle returns to the fixed point, it can go to the workpiece. It is strictly forbidden to reach around the spindle.
 
6. Every time the workpiece is clamped, make sure the workpiece is fixed before starting the machining key. Whether the moving workpiece is firm can be judged by vacuum sound absorption and manual processing.
 
7. When the machine tool sends out an abnormal alarm signal and sound, the emergency stop button should be pressed as soon as possible to remove the abnormal alarm, and the spindle can be tested in a safe position. then works normally.
 
8. When checking the abnormal air pressure and vacuum, it is strictly forbidden to process the workpiece.
 
9. Finally, when employees operate the high-gloss machine, they should pay attention to the waste and coolant generated when the spindle cuts the workpiece to prevent foreign objects from splashing on the employees.

Ultra precision machining center
High power multi head engraving and milling center machine
Multi head engraving and milling machine
High precision highlight machine
Precision large precision engraving machine
Precision double channel engraving and milling center machine
Precision double head engraving and milling center machine
Drilling and milling high gloss compound machine

Customer service

Technical guidance
after-sale service

Group news
media coverage
Employee world

Company introduction
Honorary qualification
Cooperative customers
plant and equipment
Core accessories

Contact us

Guangdong Daqun CNC Machine Tool Co., Ltd
Jiangxi Daqun Intelligent Equipment Co., Ltd

Tel:86-0769-88697788
Fax:86-0769-88697778
Email:daqun@daquncnc.com
Website:www.daquncnc.com

Address: Guangdong factory: No. 24, Gongye East Road, songshanchao high tech Industrial Development Zone, Dongguan City, Guangdong Province

Jiangxi factory: Daqun intelligent equipment Industrial Park, Jiangao Road, Ganzhou economic and Technological Development Zone, Jiangxi

COPYRIGHT © 2022   Guangdong Daqun CNC Machine Tool Co., Ltd   粤ICP备14067254号 300.cn

这是描述信息
这是描述信息
这是描述信息